Comment on [frame] Apparently my 100W brick can't do 15V.
Fubarberry@sopuli.xyz 1 day ago
Yeah different chargers/battery packs will have different supported voltage/amp outputs. These are required to be listed on the charger/battery, usually in fine print. Also, 15v/3A is a standard combination though, and is required to be present in any official USB-C device that covers 45w or more.
So if your 100w brick can’t do 15v, it either means that it’s not an official USB-C certified charger (lots of cheap online chargers aren’t official and break USB-C spec), or that the power negotiation is failing (due to damaged cord/dirty connector/etc) and it’s falling back on 5v as a minimum output to be safe.
DeveloperDeveloperDeveloperDeveloperDeveloperDevel@piefed.zip 1 day ago
Yeah, I just assumed it’s broken, because it really should be able to do it. The laptop it had once charged fine also complains now.
Funnily enough, my puny phone brick that goes up to 12V1.5A is enough to sustain the battery even while running standalone.
eco_game@discuss.tchncs.de 13 hours ago
While your laptop complaining now does point to the charger being the problem, do keep in mind most laptops charge with 20 V. And annoyingly there are USB-C chargers out there, which can only do 5 V or 20 V, but are missing the 9 V and 12 V (usually used by phones) and the 15 V used for stuff like the Steamdeck or Frame (looking at you, Dell).