These shell swaps really do be taking 5 hours

Comments

• lisko@sopuli.xyz ⁨1⁩ ⁨year⁩ ago

  That’s why I’m never gonna do that shit

  source

  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    Honestly it was a lot of fun though I really enjoyed every moment of it. The fact that there are replacement parts available takes a lot of the real stress away from it for me

    source
  • SuzyQ@sh.itjust.works ⁨1⁩ ⁨year⁩ ago

    Same. It’s why I went with the Teardown skin by dbrand. Get that see through look but with an adhesive skin instead. I’ve been very pleased with it.

    source

    • EternalWarBear@lemmy.world ⁨1⁩ ⁨year⁩ ago

      I’ve got the Clone of the Kingdom skin on mine.

      The only things I’m not liking are when using the touchscreen has a weird lip now. And getting the grips to sit pretty is annoying; might just need to apply more heat then try smoothing them out. Did it while applying, but man is it slightly difficult. Other than those two things the skin is fantastic. Would recommend getting one to people if didn’t wanna go through a shell swap.

      Lastly, if anyone is interested in one, when it says be careful with the top piece. You REALLY need to go slow and keep your fingers near the wax paper and the sticker. I was going slow then got to the vent part then it just zipped up getting a tear on one side. Luckily it still worked, but made it a slight pain applying that part of the skin.

      source
    • KSPAtlas@sopuli.xyz ⁨1⁩ ⁨year⁩ ago

      Is your username from the chromebook debug cable or is it from something else

      source

      • -> View More Comments
• CubbyTustard@reddthat.com ⁨1⁩ ⁨year⁩ ago

  [deleted]

  source

  • CorrodedCranium@leminal.space ⁨1⁩ ⁨year⁩ ago

    I still have the screws on my desk from my original Xbox that I took apart. Really should find out where they came from this weekend

    source
  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    haha those were screws that came with the kit. I reused about 99% of the original screws wherever possible

    source

    • spudwart@spudwart.com ⁨1⁩ ⁨year⁩ ago

      I take it this isn’t your first time replacing the housing on a portable device.

      source

      • -> View More Comments
  • HidingCat@kbin.social ⁨1⁩ ⁨year⁩ ago

    Eh, I usually leave off a few screws on the side panels, makes it easier for future access. XD

    source
• jordanlund@lemmy.world ⁨1⁩ ⁨year⁩ ago

  Lotta screws left over… you OK? ;)

  source

  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    Haha those were mostly screws that came in the kit. I reused 99% of the original screws

    source

    • Lemmyvisitor@lemmy.dbzer0.com ⁨1⁩ ⁨year⁩ ago

      99%??

      source

      • -> View More Comments
• elxeno@lemm.ee ⁨1⁩ ⁨year⁩ ago

  chsh -s /usr/bin/fish

  source
• Damage@slrpnk.net ⁨1⁩ ⁨year⁩ ago

  I think I’d keep the original buttons though

  source

  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    I did think about doing that but I didnt think it would look too good. The company I got it from has button replacements and im thinking of going with a solid light green or “matcha” green

    source
• mojo@lemm.ee ⁨1⁩ ⁨year⁩ ago

  5 hours of effort, hundreds of hours of swagging on everyone who can’t pull that off.

  source
• Sharpiemarker@feddit.de ⁨1⁩ ⁨year⁩ ago

  But I like having a warranty and my A button is starting to stick.

  source

  • merthyr1831@lemmy.world ⁨1⁩ ⁨year⁩ ago

    Im not sure if this voids the warranty at all, Valve is pretty lenient with it

    source

    • Sharpiemarker@feddit.de ⁨1⁩ ⁨year⁩ ago

      I’m not sure they’d be comfortable servicing it with aftermarket parts. Some manufacturers that allow customization will tell you to undo the mods before sending it in for repair.

      source
  • BlinkerFluid@lemmy.one ⁨1⁩ ⁨year⁩ ago

    Lose the soda, man, and clean her up with a little rubbing alcohol on a cotton swab.

    source

    • Sharpiemarker@feddit.de ⁨1⁩ ⁨year⁩ ago

      Huh? Sorry dude I’m an adult. I don’t drink soda near electronics. My Deck has had a screen protector and protective case since day 1. I baby my tech. Pretty sure my A button is either defective or prematurely wearing out.

      source

      • -> View More Comments
• JCreazy@midwest.social ⁨1⁩ ⁨year⁩ ago

  Is it actually green? Different pictures make it look more teal or bluish. I wish it was closer to a jungle green. I’d love to do a shell swap but I’m Leary about removing the screen.

  source

  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    it’s definitely closer to teal rather than actual emerald. I think Jsaux did the the color better they just dont have a faceplate in that color as well

    source
• wander1236@sh.itjust.works ⁨1⁩ ⁨year⁩ ago

  I’m kind of annoyed JSAUX made a green back shell but still haven’t made a front shell to match.

  I’ve got a green backed Steam Deck just begging for a green front.

  source

  • Whisp@kbin.social ⁨1⁩ ⁨year⁩ ago

    I don't have one of these myself, and I don't work for this company (Canadian) but check out:

    https://www.xtremeskins.co.uk/products/steam-deck-skins

    They've got a Matte green that might be what you're looking for. It looks like the old gameboy color green.

    source

    • zqwzzle@lemmy.ca ⁨1⁩ ⁨year⁩ ago

      .co.uk is a UK domain not Canadian.

      source
  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    Thats what stopped me from going that route. A buddy showed me ExtremeRate and i went on a little shopping spree

    source
• dandroid@dandroid.app ⁨1⁩ ⁨year⁩ ago

  It looks worth it though.

  source

  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    Absolutely! It was fun too i enjoyed doing the swap except for the screen and the pads

    source
• Potatisen@lemmy.world ⁨1⁩ ⁨year⁩ ago

  Looks damn good tho!

  source
• Cort@lemmy.world ⁨1⁩ ⁨year⁩ ago

  Have you ever done shell swaps on other devices? If so, how would you compare this one?

  I’ve done joy con pairs in 1.5-2 hours but dualshock 4 took 20+ reassemble attempts over the course of a week before I got it working.

  The switch light I did took a little over 3 hours.

  Just trying to gage if the front panel is something I really want to try

  source

  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    I havent done many shell swaps but ive torn down my fair share of electronics I have to say the screen is the hardest part on this everything else was pretty straight forward unscrew and unplug ribbon cables (and remember to actually put them back…) im doing some controller shell swaps real soon here though so thatll get me a little understanding on where the SD stands. It did take me 5 hours but I was being quite careful and taking my time id be fairly confident in taking it apart again and I plan to swap in some hall effect sticks or maybe mess with the triggers a little

    source
  • Texas_Hangover@lemm.ee ⁨1⁩ ⁨year⁩ ago

    Damn! Why was the dualshock such a pain in the ass? Ive got a couple I’ve been wanting to unfuck, but if its that tedious of a process I’ll just say screw it lol.

    source

    • Cort@lemmy.world ⁨1⁩ ⁨year⁩ ago

      The ribbon cable that connects the buttons to the motherboard has a REALLY finicky. There is basically no retention mechanism, so you have to line up the ribbon on the contacts and screw everyone back together. I’m not even sure it’s actually a ribbon cable or if it is, it’s a really old style. I had to take it apart and put it back together again a bunch of times.

      source
• C4RP3_N0CT3M@kbin.social ⁨1⁩ ⁨year⁩ ago

  I was very careful doing mine, but the real things to watch out for (more than the LCD screen) are the touchpads. Those things can't be recalibrated, and there are no replacements. You can adjust the sensitivity everywhere but in desktop mode, but it makes the keyboard damn near impossible to use. Again, I barely touched them and had no issues reconnecting them, but when I got everything back together they were way too sensitive.

  source
• SkunkWorkz@lemmy.world ⁨1⁩ ⁨year⁩ ago

  Damn 5 hours. Maybe I’m gonna do one when those Deck HD screens finally are available.

  source

  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    Thats not a bad idea especially because there is a risk of damaging the screen when taking it apart

    source
• donuts@kbin.social ⁨1⁩ ⁨year⁩ ago

  I'd love a shell swap but I'm really scared that I'll fuck up my screen or something.

  source

  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    screen was definitely the hardest part. Fortunately worst case scenario is you buy a replacement screen that’s available! That’s actually what gave me the confidence to do it, knowing that if I bork anything up that replacements are available, improvements even

    source
• proper@lemmy.world ⁨1⁩ ⁨year⁩ ago

  looks nice tho!

  source

  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    Thank you! Im pretty satisfied with how it turned out

    source
• IronSage@sh.itjust.works ⁨1⁩ ⁨year⁩ ago

  I broke the audio on my steam deck. It has to be hardware but i took it apart and back together again like 3 times. Oh well, i got a aya neo geek 1s on the way, im sure ill miss the deck and continue to use bluetooth audio

  source

  • Nindelofocho@lemmy.world ⁨1⁩ ⁨year⁩ ago

    Im sure you can get a replacement audio board or cables! its real easy to nick those tiny wires

    source

    • IronSage@sh.itjust.works ⁨1⁩ ⁨year⁩ ago

      I got replacement speakers but that was not the problem. I do not see anywhere to get a replacement audio board or ribbon cables.

      If you see anywhere, let me know!

      source

      • -> View More Comments